Sony TC-K511S - Multi-AMS Selection Finding

A L : Beginning of the selection
[cl «af :]
Previous selection
p
>» [
Current selection
{
‘] >> [z]
Next selection
Locating a Selection
— Multi-AMS (Automatic
Music Sensor)
By detecting the blank space between
selections, the Multi-AMS function allows
you to skip up to 30 selections during fast
forwarding or reversing to locate the
beginning of a selection.
During playback, press P> or 44 as
many times as the number of selections
to be skipped.
For selections after the current one:
press PP the required number of times.
For selections before the current one:
press éd the required number of times”.
* Pressing <4 once locates the beginning
of the current selection.
(Fig. ES )
Fig. B :
« The number of selections to be skipped,
which replaces the counter indication,
decreases by one each time a blank
space is detected.
* The PLAY indicator flashes during Multi-
AMS operation.
+ When the beginning of the desired
selection is reached, the counter
indication returns and playback
automatically restarts.
Modifying the indicated number of
selections to be skipped
The number of selections to be skipped
may be modified by pressing the << or >>
button at any time, even during Multi-AMS
operation.
Regarding changes in the indicated
number
The indicated number of selections to be
skipped may change even as it is being set
due to the detection of blank spaces during
fastwinding of the unit.
The Multi-AMS may skip a selection
in the following cases:
* If the BP (or €) button is pressed
immediately before the following selection.
e If there is noise in the space between
selections.
« If the space is less than four seconds
long.
The Multi-AMS will treat the
following as blanks:
* a long pause in the music
* a passage of low frequencies or very low
volume
* a gradual increase or decrease in volume