Sony TC-K511S - Technical Specifications

Specifications
Recording system 4-track 2-channel stereo
Fast winding time Approx. 90 sec. (with Sony C-60 cassette)
Bias AC bias
Heads Erasing head x 1 (S&F head)
Recording head x 1 (SD head)
Playback head x 1 (SD head)
Motors Capstan motor x 1 (DC servo motor)
Reel motor x 1 (DC motor)
Signal-to-noise ratio (at peak level and weighted)
Cassette Type IV Type Il | Type |
(Dolby NR off) |
60 dB 5908 | 57 dB
S/N ratio improvement (approximate values)
With Dolby B NR on: 5 dB at 1 kHz; 10 dB at 5 kHz
With Dolby C NR on: 15 dB at 500 Hz; 20 dB at 1 kHz
With Dolby S NR on: 10 dB at 100 Hz; 24 dB at 1 kHz
(TC-K511S only)
Harmonic distortion 0.4% (with Type |, 160 nWb/m
315 Hz, 3rd H.D.)
1.5% (with Type IV, 250 nWb/m
315 Hz, 3rd H.D.)
Frequency response (DOLBY NR off)
| Type IV cassette | 30 - 19,000 Hz (+3 dB, IEC)
30 - 16,000 Hz [+3 dB (-4dB recording)]
| Type II cassette | 30 - 18,000 Hz (+3 dB, IEC)
| Type | cassette | 30 - 17,000 Hz (+3 dB, IEC)
Type IV : Sony METAL-S
Type II : Sony UX-S
Typel : Sony HF-S
Wow and flutter + 0.13% W.Peak (IEC)
0.07% W.RMS (NAB)
+ 0.18% W.Peak (DIN)
nputs
Line inputs Sensitivity 0.16 V
(phono jacks) Input impedance 47k ohms
Outputs
Line outputs Rated output level 0.5 V at a load impedance
(phono jacks) of 47 k ohms
Load impedance | Over 10 k ohms
Headphones Output level 1 mW ata load impedance
(stereo phone jack) of 32 ohms
General
Power requirements 240 V AC, 50 Hz
Power consumption 23 W
Dimensions Approx. 430 x 123 x 310 mm (w/h/d)
(17 x 47% x 121/4 inches)
including projecting parts and controls
Mass Approx. 4 kg (8 Ibs 14 oz)
Supplied accessories Audio connecting cords (2)
Optional accessory Wireless remote control unit RM-J701
Design and specifications are subject to change without notice.
Note
This appliance conforms with EEC Directive 87/308/EEC regarding
interference suppression.
22