14
10
Most TV channels broadcast information via teletext. The index page of the teletext
service (usually page 100) gives you information on how to use the service.
Please use a TV channel with a strong signal, otherwise there may be
Teletext errors.
216-02
01 03 04 05 06 07 0802
Operation
Teletext
Switching Teletext on and off
1 Select the TV channel which carries the teletext service you want to view.
2a Press the
button once on your remote control to switch Teletext on.
b Press
again for Mix mode.
The TV broadcast and the Teletext display are overlapped.
3 Press
;
or press a third time to switch teletext off.
Selecting a Teletext Page
Input the three digits of the page number using the number buttons on your remote
control.
If you have made a mistake:
Type in any three digits, then re-enter the correct page number.
Page Catching
1 Using the number buttons on the remote control, select a teletext page which
has several page numbers on it (e.g. the index page).
2 Press the OK button.
Page Catching is displayed.
3 Select the desired page number using 4 or $ then press the OK button.
The requested page is displayed after some seconds.
Selecting the next or the preceding page
•
Press (Page +) or (Page -).
Selecting the index page
•
Press
+
.
Selecting a subpage
A teletext page may consist of several subpages. In this case an information line
is displayed, showing the number of subpages.
•
Select the mode by pushing to 4. Select the subpage by using 4 or $.
Freezing a Teletext subpage
1 Press to freeze the Teletext page.
2 Press
to resume normal teletext reception.
Using Fastext*
*depending on availability of service
Fastext lets you access pages with one button stroke. When Fastext is broadcast,
a colour-coded menu appears at the bottom of the screen. The colours of this
menu correspond to the red, green, yellow and blue buttons on the remote
control.
•
Press the coloured button which corresponds to the colour in the
colour-coded menu.
11
Using the Teletext menu
This TV set has a menu-guided teletext system. When teletext is switched on
you can use the joystick buttons to operate the teletext menu.
Select the menu functions as follows:
1 Press the MENU button on the remote control to display the Teletext menu.
2 Select the teletext function using 4 or $. Push to ” to enter.
Top/Bottom/Full
For convenient reading of a Teletext page you can enlarge it.
After having selected the function, a sub menu Top 4 Bottom $ Full OK
is displayed.
•
Push to 4 to enlarge the upper half of the screen, push to $ to enlarge the lower
half. Press OK to resume the normal size. Press
to resume the normal
Teletext operation.
Text Clear
After having selected the function, you can watch a TV channel while waiting
for a requested Teletext page. As soon as the page is available, the symbol
changes colour.
•
Press to view the page.
Reveal
Some teletext pages contain hidden information (e.g., for a quiz), which you can
reveal.
After having selected the function, the hidden information appears.
•
Press to resume the normal Teletext operation.
Time Page*
*depending on availability of service
You can call up a time-coded page - such as an alarm page - at a time specified
by you.
After having selected the function a sub menu is displayed.
1 Select On using 4 or $. Push to ” to enter.
2 Enter the three digits of the desired page using the number buttons.
3 Enter the four digits of the desired time using the number buttons.
4 Press OK to store.
The time is displayed in the top left-hand corner of the screen.
At the requested time the page is displayed.
Teletext
Top / Bottom / Full
Text Clear
Reveal
Time Page
Select: Enter Menu:
Top: Bottom: Full: OK
Time Page
PAGE TIME
Select: Enter:
– – – - - : - -
Operation
To Next Page
Loading...
