To Next PageTo Next Page
Need help?Do you have a question about the Sony Trinitron KV-29FV15 and is the answer not in the manual?
General safety warning regarding anode discharge and CRT shield.
Warning about using an isolation transformer for safety due to live chassis.
Warning for critical components that affect safe operation.
Procedures for testing AC leakage current to ground.
Methods to establish proper earth ground connection for tests.
Guide to connecting various external devices to the TV.
Instructions for connecting a cable box for channel reception.
Steps for connecting a VCR to the TV for playback or recording.
Connecting a cable box and cable to view scrambled channels.
How to connect two VCRs for recording or editing.
Instructions for connecting a DVD player to the TV.
Connecting a DVD player with component video output.
Connecting a satellite receiver to the TV.
Connecting a satellite receiver and VCR to the TV.
Connecting external audio systems.
Connecting an audio system for enhanced sound.
Connecting a camcorder for viewing.
Using CONTROL S and S-Link features.
How to use the CONTROL S feature for remote control.
Connecting S-Link to a VCR for automatic TV setup.
Connecting S-Link to a satellite receiver.
Basic setup procedures including inserting batteries.
Instructions for inserting batteries into the remote.
Explanation of remote control buttons.
Using front panel buttons to access menus.
General guide to using the TV.
Using AUTO PROGRAM to set up channels.
Explains advanced remote control buttons for TV operations.
Details on white-labeled remote buttons.
How to use the Picture-in-Picture feature.
Using yellow remote buttons for PIP.
Guide to navigating the TV's on-screen menus.
Example of how to select and change menu settings.
Overview of the different menu sections.
Adjusting picture settings via the VIDEO menu.
Adjusting audio settings via the AUDIO menu.
Setting the clock and timers.
Accessing and using the SET UP menu.
Detailed channel setup options.
How to set up favorite channels.
How to access favorite channels.
Labeling connected video equipment.
Adding captions to channels.
Overview of TV and movie rating systems.
How to set the TV's rating and change password.
Accessing and using the Parental Control menu.
Programming the remote to control other equipment.
Continued guide to operating video equipment.
Using remote buttons for DVD player operation.
Programming remote for cable box/satellite receiver.
Steps to program the remote control for other devices.
Common problems and their solutions.
List of supplied and optional accessories.
Adjusting beam landing for proper picture alignment.
Adjusting picture convergence for color alignment.
Static convergence adjustment procedures.
Adjusting BMC magnets for dot positions.
Adjusting Y separation axis correction magnet.
Performing dynamic convergence adjustments.
Adjusting convergence for screen corners.
Adjusting the TLH plate on the deflection yoke.
Adjusting the focus for picture sharpness.
Adjusting the screen (G2) for raster brightness.
Adjusting white balance for accurate color.
Confirmation and readjustment of specific components.
Confirming and adjusting B+ voltage.
Performing circuit adjustments using the remote.
Steps to enter the service adjustment mode.
Method to confirm memory write operations.
Adjusting the sub brightness level.
Adjusting sub contrast level.
Adjusting sub hue and sub color.
Adjusting horizontal picture size.
Adjusting vertical picture size.
Adjusting vertical picture position.
Adjusting horizontal picture position.
Adjusting linearity, correction, pin amp, and trapezium.
Adjusting vertical angle, bow, and pin positions.
Adjusting P&P sub contrast.
Adjusting P&P sub color and hue.
Adjusting the position of On-Screen Display.
Adjusting the rotation coil for picture alignment.
First part of the overall block diagram.
Second part of the overall block diagram.
Third part of the block diagram, focusing on PIP.
Visual guide to the location of circuit boards.
Reference for all printed wiring boards and schematics.
General