Sony Trinitron KV-G21QW3 User Manual

http://cxema.ru
– 7 –
KV-G21MW3/G21QW3
RM-869
7
Getting Started
-EN
5
Press +/– on the remote commander or
.
+/– on the TV again.
To start presetting channels automatically
from the specified program position
Press PROGR +/– or number buttons on the remote
commander or PROGR +/– on the TV until the
required program position appears on the screen after
step 4 of “Presetting channels automatically”.
Presetting channels manually
1
Press SELECT on the remote commander or the
TV until “TV SYSTEM” appears on the screen
(for
KV-G21MW3
only).
2
Press +/– on the remote commander or
.
+/– on the TV to select the TV system (for
KV-G21MW3
only).
3
Press SELECT on the remote commander or
the TV until “MANUAL PROGRAM
” appears
on the screen.
4
Press +/– on the remote commander or
.
+/– on the TV.
5
Press PROGR +/
– or number buttons on the
remote commander or PROGR +/
– on the TV
until the required program position
appears on the screen.
6
Press +/– on the remote commander or
.
+/– on the TV until the required channel
picture appears on the screen.
7
Press SELECT on the remote commander or
the TV.
Disabling program positions
1
Press PROGR +/– or number buttons on the
remote commander or PROGR +/
– on the TV
until the unused or unwanted program
position appears on the screen.
2
Press SELECT on the remote commander or
the TV until “MANUAL PROGRAM
” appears
on the screen.
3
Press +/– on the remote commander or .
+/– on the TV.
4
Press PIC MODE on the remote commander.
5
Press SELECT on the remote commander or
the TV.
To preset the disabled program position again
Preset the channel quickly, automatically or manually
.
TV SYSTEM
SELECT SELECT
or
or
B/G I D/K M
–
.
+
MANUAL PROGRAM
SELECT
SELECT
or
1
2
3
4
6
7
8
9
÷
0
5
PROGR
– PROGR +
or
or
VHF LOW B/G
–
.
+
1
SELECT
SELECT
or
1
2
3
1
–
.
+
1
2
3
4
6
7
8
9
÷
0
5
PROGR
– PROGR +
or
or
or
or
–
.
+
or
Getting Started
6
-EN
Presetting channels
If the picture color is poor and/or the sound is
noisy (for KV-G21MW3 only)
Select the appropriate TV system as follows:
1 Press SELECT on the remote commander or the TV
until “TV SYSTEM” appears.
2 Press +/– on the remote commander or
.
+/– on
the TV until the picture and sound becomes
normal.
Notes
• If you do not know your local TV system, consult your nearest
authorized service center or dealer.
• The setting of the
“TV SYSTEM” is memorized for each
program position.
Presetting channels automatically
1
Press SELECT on the remote commander or
the TV until “TV SYSTEM” appears on the
screen (for KV-G21MW3 only).
2
Press +/– on the remote commander or
.
+/– on the TV to select the TV system
(for KV-G21MW3 only).
3
Press SELECT on the remote commander or
the TV until “AUTO PROGRAM
” appears on
the screen.
4
Press +/– on the remote commander or
.
+/– on the TV.
You can preset up to 100 TV channels in numerical
sequence from program position 1 using the buttons on
the remote commander or the TV.
You can preset TV channels quickly, automatically or
manually.
Quick channel presetting
1
Press
U
to turn on the TV.
When the TV is turned on in standby mode, press
u
on the remote commander.
2
Press SELECT and PROGR + on the TV
simultaneously for one to two seconds.
Remote commander
TV SYSTEM
SELECT SELECT
or
1
2
3
1
– PROGR +
SELECT
U
TV
–
PROGR
+
–
.
+
TV/VIDEO
SELECT
R
U
u
Number
PROGR +/–
+/–
SELECT
or
or
or
AUTO PROGRAM
SELECT SELECT
B/G I D/K M
–
.
+
VHF LOW B/G
1
–
.
+
Front of TV

Sony Trinitron KV-G21QW3 Specifications

General

Brand	Sony
Model	Trinitron KV-G21QW3
Category	TV
Language	English