Sony TRINITRON KV-M1450E - Page 8

26
Connecting a VCR
We recommend that you tune
in the signal to programme
number “0”.
For details see “Presetting
Channels Manually” on
page 31.
Presetting Channels
Automatically
TV searches for all available channels. PROGR 01
If manual tuning is preferred see Menu Uniti. - -
option - Presetting Channels Manually.
1 Plug into mains.
Depress power switch © [@ on TV set.
2 Press and hold BY] f@ on TV set for 2 seconds.
Auto tuning starts and screen shows.
When Auto tuning stops, the programme position 1 is displayed.
TV Operation
TV Operation
This section explains functions used whilst watching TV. Most operations are carried
out using the Remote Commander (numbers in circles). All basic functions are also
available on the TV set (letters in boxes).
To Press
Switch on ©fMonTv
Switch off temporarily o®
TV is now in standby mode, © indicator [J on
TV lights.
Switch on again © ®, PROGR +/-@ or any number
button@
Switch off completely © WonTv
To save energy we recommend switching off
completely when TV is not in use.
PROGR +/- ® Ef or number buttons @
For double digit numbers press -/-- @ then the
number e.g. For 23, press -/-- @ then 2 and 3.
Select programmes
Display the programme number ® ®
Press again to make programme number
disappear.
Adjust the volume —1+/-OB
Mute the sound «x@®
Press again to restore sound.
View
video
input
208
Press again to return to TV programme.
View programmes in 16:9 mode 2? @
Press again to return to 4:3 mode.
Note: 4 @ is to be used to optimise the viewing of 16:9 signals which will be
available in the future.
27