What to do if my Sony Printer says out of paper but there is still paper?
This is not a defect. Some spare paper will be left over. Remove the leftover paper and load a new ribbon cartridge and paper roll.
Why can't my Sony UP-CR10L read the image data?
There are several reasons why your printer might not be able to read image data: * The memory card may not contain any data, so insert a memory card that contains image data. * Data has been recorded on the memory card in a format that the unit does not recognize. Be sure to store image data in a format that the unit can recognize. * The memory card may not be properly inserted. Make sure that the memory card is fully inserted. * The memory card may not be inserted in the correct direction. Set the memory card in the direction shown on the operation screen.
Why is there a white margin on my Sony UP-CR10L's printed image?
The print position may not be correct. Adjust the print position.
Why is the display not on or difficult to see on my Sony UP-CR10L Printer?
Depending on the display angle, the display may not be visible or may be difficult to see. Adjust the angle of the display to improve the display appearance.
What to do if my Sony UP-CR10L says “no ribbon cartridge” message appears after loading?
The ribbon may not have been loaded correctly. Ensure that ribbon is loaded correctly.
What to do if my Sony Printer says “no paper” message appears after paper roll was loaded?
The paper roll may not have been loaded correctly. Ensure that paper roll is loaded correctly.
Why won't my Sony UP-CR10L power on?
If your Sony Printer isn't powering on, ensure the power cord is securely connected. Also, verify that you've fully pressed the on/standby button.
How to fix Sony Printer when image data cannot be read?
If your Sony Printer can't read image data, it might be due to several reasons. First, the memory card might not contain any data. If it does, ensure the data is in a format the printer recognizes. Also, check that the memory card is fully and correctly inserted into the printer, following the direction indicated on the operation screen.
What to do if my Sony Printer says 'no paper' after loading paper?
If your Sony Printer displays a 'no paper' message even after loading the paper roll, ensure that the paper roll is loaded correctly.
Why does my Sony UP-CR10L not switch to standby mode?
If your Sony Printer doesn't switch to standby, it may still be processing data; wait for it to finish. If the issue persists, disconnect the power cord from the outlet, reconnect it, and then press the on/standby button.
General| Print Resolution | 300 dpi |
|---|---|
| Print Technology | Dye-sublimation |
| Connectivity | USB |
| Print Method | Dye-sublimation |
| Interface | USB |
Covers warnings on moisture, opening cabinet, earthing, and serial-number specific power instructions.
Identifies slots for Memory Stick, xD-Picture, SD/MultiMediaCard, SmartMedia, and CompactFlash.
Step-by-step guide to connect the power cord to the unit and outlet.
Instructions on handling and using paper rolls and ribbon cartridges, including print pack types.
Step-by-step guide for inserting the paper roll into the paper core.
Detailed steps for opening the holder, inserting the roll, and removing labels.
Step-by-step guide for inserting the ribbon cartridge correctly.
Guides on how to remove spent paper rolls and ribbon cartridges.
Steps to remove paper remnants, open the holder, and extract the paper roll and core.
Instructions on releasing the latch and removing the ribbon cartridge.
Steps to copy promotional images and border templates from CD-ROM to the card.
Steps to start units with serial numbers starting with 11 using the on/standby button.
Steps to start units with serial numbers starting with 51 using the POWER switch.
Steps to shut down units with serial numbers starting with 11 using the on/standby button.
Steps to shut down units with serial numbers starting with 51 using the POWER switch.
Steps to access the administration screen and enter the password.
Covers language, beep, PC connection, touch panel, and screen settings.
Covers administration settings like passwords, budget codes, and system logs.
Configures beep sounds for operations and PC connectivity.
Allows choosing the system language and setting it as default.
Allows choosing between Quick Print, Full Mode, and Event Mode for operation.
Guides on entering text to be printed on images using the text input screen.
Allows setting prices for different print sizes and additional costs for features.
Sets limits on the number of prints per order, rental, or ink ribbon usage.
Manages passwords for printing and budget code input requirements.
Allows setting or changing the password for the administration screen.
Lists the types of memory cards supported by the unit.
Guides on inserting, removing, and notes for "Memory Stick" and "Memory Stick Duo".
Instructions for inserting and removing CompactFlash cards with precautions.
Steps to safely remove a CompactFlash card.
Explains preparing for wireless printing via Bluetooth.
Describes how to select images, deselect, select all, and navigate through pages.
Instructions on setting the number of copies for individual images or all selected images.
Guides on previewing images and accessing the edit menu for adjustments.
Details access to Crop & Rotate, Color Adjustment, Red Eye Reduction, and Sepia/B&W.
Reviewing print quantity, pricing, and estimated print time before starting.
Inputting the checkout or administrator password, or budget code.
Guides on choosing a layout and assigning images to frames.
Steps to create a password file on a memory card via the administration screen.
Instructions for using a memory card with a password file to enter passwords.
Guides on installing the necessary printer driver software on a computer.
Instructions for connecting the printer to a computer via USB, including ferrite core use.
Covers safe operation, power cord care, and avoiding disassembly or spills.
Step-by-step guide using a cleaning cartridge and sheet to remove internal dirt.
Final steps of the cleaning process, including ejecting the sheet and reinserting cartridges.
Solutions for paper loading, "no paper" messages, and ribbon loading issues.
To Next Page
