19
5
Repeat steps 3 and 4 until the platen roller becomes
clean.
6
After the platen roller has been dried completely,
close the door by pushing it.
Specifications
Power Requirements
12 V to 24 V DC
Input Current 6 A to 3 A
Operating Temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating Humidity
20% to 80% (no condensation allowed)
Operating Pressure
700 hPa to 1,060 hPa
Storage and Transport Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and Transport Humidity
20% to 80% (no condensation allowed)
Storage and Transport Pressure
700 hPa to 1,060 hPa
Dimensions 140 × 70 × 125 mm (w/h/d)
(5 5/8 × 2 7/8 × 5 inches) Not incl.
projecting parts
Mass 1 kg (2 lb 3.3 oz) (printer only)
Thermal head Thin-film thermal head, 896 dots
Gradation 256-level gradation (8-bit)
Memory capacity
896 × 2688 × 8 (bit)
Picture size 75.7 × 227.1 mm (max.)
Printing speed About 5 sec./image (896 × 1196 dots)
(High speed print mode)
About 8 sec./image (896 × 1196 dots)
(Normal speed print mode)
Picture elements
896 × 2688 dots (max.)
Dot density H: 75.7 mm/896 dots = 0.085
V: 75.7 mm/896 dots = 0.085
Square dots
Interface USB(full-speed)
Accessories provided
Thermal head cleaning sheet
(4-419-859- ) (1)
CD-ROM (including multi-lingual
instructions for use, Readme and
printer driver) (1)
Before Using this Printer (1)
Service Contact List (1)
European Representative (1)
Optional accessories
Thermal Print Media: UPP-84S/84HG
To Next Page
Loading...
