What does it mean if ON/STANDBY flashes in red on Sony VPL-CX125 (2 flashes)?
If the ON/STANDBY indicator is flashing red with a repetition rate of 2 flashes, it indicates that the internal temperature is unusually high. Check to ensure that nothing is blocking the ventilation holes. Also, if you are using the projector at a high altitude, ensure that “High Altitude Mode” on the Setup menu is set to “On.”
Why is the picture noisy on my Sony VPL-CX125 Projector?
Noise may appear on the background of your Sony Projector depending on the combination of the numbers of dot input from the connector and numbers of pixel on the LCD panel. To resolve this, change the desktop pattern on the connected computer.
How to fix a blurry picture on my Sony Projector?
If the picture on your Sony Projector is not clear, first adjust the focus. If that doesn't resolve the issue, condensation may have occurred on the lens. In this case, leave the projector on for about two hours to allow the condensation to clear.
What does it mean when the LAMP/COVER indicator flashes orange on my Sony Projector?
If the LAMP/COVER indicator on your Sony Projector flashes orange twice repeatedly, it means that either the lamp cover or the air filter cover is detached. Attach the cover securely.
General| Brightness | 3000 ANSI Lumens |
|---|---|
| Resolution | 1024 x 768 (XGA) |
| Contrast Ratio | 2000:1 |
| Display Technology | 3LCD |
| Projection Size | 30 to 300 inches |
| Display Type | LCD |
| Weight | 2.9 kg |
| Input Ports | S-Video, RS-232C |
| Lamp Type | UHP |
| Zoom | 1.2x |
Details the network presentation and control functions of the projector.
Lists the recommended system requirements for Projector Station for Air Shot Version 2.
Instructions for installing Projector Station for Air Shot Version 2 on a computer.
Steps to connect the network cable and turn on the projector.
Explains how to access the projector's web interface from a computer.
Details how to control projector functions through the web interface.
Covers configuration of owner information, password, date, and time.
Explains how to set and manage administrator and user passwords.
Details how to configure the projector's automatic e-mail reporting features.
Specifies options for scheduling regular, maintenance, and error email reports.
Configuration of email addresses, SMTP/POP servers, and authentication.
Provides solutions for common projector and connection issues.
Explains error messages and their causes/remedies.
To Next Page
