Sony VPL-CX63 - Page 26

22
VPL-CX61/CX63/CX75/CX76/CX80/CX85/CX86/CX100/CX120/CX125/CX150/CX155/CW125/FE40/FE40L/FH300L/FX40/FX40L/FX51/FX52/FX52L/FW300L/PX35/PX40/PX41
5. [AV mute command] AVMT
This command sets the projector’s AV mute setting.
The available parameters are as follows:
Parameter 11 : Projector video mute ON
Parameter 10 : Projector video mute OFF
Parameter 21 : Projector audio mute ON
Parameter 20 : Projector audio mute OFF
Parameter 31 : Projector video + audio mute ON
Parameter 30 : Projector video + audio mute OFF
The projector responds as follows:
When processed properly : Returns “OK”.
When parameter is out of range : Returns “ERR2”.
Unacceptable period (when the power status is other than Power ON) : Returns “ERR3”.
Projector error occurring (including warning) : Returns “ERR4”.
6. [AV mute status inquiry] AVMT?
This command obtains the projector’s AV mute status.
The projector responds as follows:
Returns the following values when the AV mute status is obtained:
When the projector video mute is ON : Returns “11”.
When the projector audio mute is ON : Returns “21”.
When the projector video + audio mute is ON : Returns 31”.
When the projector video + audio mute is OFF : Returns 30”.
Unacceptable period (when the power status is other than Power ON) : Returns “ERR3”.
Projector error occurring (including warning) : Returns “ERR4”.