Sony VPL-EX175 - 2-4-3. Sub

2-8 (E)
VPL-EX100
2-4-3. Sub
1. Copy the three fi les rx2vXXXXX.dli, 5212.inf, and rx2vXXXXX.mot into the same folder of applica-
tion fi le Flash.exe.
n
XXXXX means version number.
2. Double-click Flash.exe to start the application.
Application name: Sub Flash Upgrader for Sony Projector
File name: Flash.exe
3. Check rx2vXXXXX.dli, 5212.inf, rx2vXXXXX.mot are selected in download information fi le, MCU
Type setting, and ROM File Name respectively.
4. Click the [Setting] button of Com.
The window for operation frequency and bit rate is displayed.
5. Set the following items.
Bit rate: 38,400 bit/s
Serial port: Serial port number/USB port number used for connecting PC
Time out: Arbitrary (Communication retrial time. default: 5 sec.)
6. Select “UserProgram Mode”.
7. Click the [Start] button.
The start window is displayed.
8. Click the [OK] button.
The “Please AC Plug In” window is displayed.
9. Connect the AC plug.
10. Click the [OK] button.
The writing starts, and the write window is displayed.
11. The End window is displayed. (Upgrade completed)