39
Projecting
Selecting Desired Adjust Menu Items in the Order
1 Press ADJ PIC.
Each time you press the button, the
following adjustment windows are
displayed in sequence.
“Advanced Iris”, “Lamp Control”,
“Film Projection”, “Motion
Enhancer”, “Contrast”, “Brightness”,
“Color”, “Hue”, “Color Temp.”,
“Sharpness”, “NR”, “MPEG NR”,
“Film Mode”, “Black Level Adj.”,
“Gamma Correction”, “x.v.Color”,
“Color Space”
For details on each adjustment, see the
Picture menu. (1 page 46)
Some adjustment windows cannot be
displayed, depending on the type of input
signal. For details, see “Input Signals and
Adjustable/Setting Items” (1 page 79)
2 Make the setting or adjustment
on an item with M/m/</,.
When changing the adjustment
level
To increase the value, press M/,.
To decrease the value, press m/<.
When changing the setting
Press M/m to change the setting.
1
2
M/m/</,
(arrow) /
(enter) buttons
ADJ PIC
button
Note
Example: To adjust the contrast
To Next Page
