Sony VPL-VW80 - Page 80

80
Screen menu
z : Adjustable/can be set
– : Not adjustable/cannot be set
*
1
: The setting can be made only when “x.v.Color” is set to “Off”.
*
2
: The setting can be made only when “Wide Mode” is set to “Full” and “Over Scan” is set to “On”
in the Screen menu.
*
3
: If the input signal is from a computer, the setting cannot be made when the aspect ratio is 16:9
or wider.
*
4
: The setting can be made only when “Zoom” is selected in “Wide Mode”.
*
5
: The setting can be made only for analog signal.
When connecting a cable such as an HDMI cable, etc., check the type of the signal in the Information
menu (1 page 60) and Digital signal (1 page 78), and check items that are adjustable/can be
set.
Item Input signal
Video signal Component
signal
Video GBR signal Computer
signal
Wide Mode zzzz *
3
Over Scan – zz–
Screen Area *
2
– z
(preset memory
numbers 7, 8, 9,
12, 13, 14 only)
z
(preset memory
numbers 7, 8, 9,
12, 13, 14 only)
–
V Center *
4
zzzz
Vertical Size *
4
zzz–
APA – – – z *
5
Phase – – – z *
5
Pitch – – – z *
5
Shift – z *
5
z *
5
z
Note