27-GB
On the remote control
1 Press DISPLAY while playing.
Each time you press DISPLAY, the
display changes as follows.
Display window on the remote control
z
• If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 19.
• The display that appears on the recorder is
different from the ones on the remote control.
See “On the recorder” (page 26) to check the
display that appears on the recorder.
Locking the controls
(HOLD)
To prevent the buttons from being
accidentally operated when you carry the
recorder, use this function.
1 Slide HOLD in the direction of the
..
On the recorder, slide HOLD to lock
the controls of the recorder. On the
remote control, slide HOLD to lock
the controls of the remote control.
Slide HOLD in the opposite direction
of the arrow to unlock the controls.
DE
Track number Elapsed time
Track number Track name
1)
1)
Appears only if the track has been labeled.
The number of
tracks in the disc
Disc name
1)
— Recorded time
2)
2)
Appears only when the clock is set.
DISPLAY
ED
HOLD
HOLD
To Next Page
Loading...
Need help?
General