Sony Walkman MZ-R91 User Manual

32-GB
3 Flip the jog lever to select the
destination track number.
For the example above, “MV 003 t
002” appears in the display.
To cancel moving, press x or T
MARK.
4 Press the jog lever again.
The track moves to the selected
destination track.
On the remote control
1 Press DISPLAY for 2 seconds or
more while playing the track you
want to move.
“ :Name” flashes in the display
and the recorder plays the selected
track repeatedly.
2 Press the control towards . or
towards N • > repeatedly until
“ :Move” appears in the display.
3 Press x.
For the example above, “MV 003 t
003” appears in the display.
4 Press the control towards . or
towards N • > repeatedly to
select the destination track number.
For the example above, “MV 003 t
002” appears in the display.
To cancel moving, press DISPLAY
for 2 seconds or more.
5 Press x again.
The selected track moves just before
the destination track.
Labeling recordings
You can name tracks during playback,
discs during stop, and both during
recording. Each name can be as long as
200 letters.
Each disc can hold up to 1700
alphanumeric letters during playback or
stop.
On the recorder
Labeling a disc during stop
1 Insert a disc.
2 Press the jog lever so that “EDIT”
flashes in the display, and then press
the lever again.
“ :Name” flashes in the display.
3 Press the jog lever.
The disc is ready to be labeled.
DISPLAY
Control
x
./>
VOL +/–
T MARK
X
END SEARCH
x
Jog lever

Sony Walkman MZ-R91 Specifications

General

Brand	Sony
Model	Walkman MZ-R91
Category	CD Player
Language	English