38-GB
Searching by the first letter of a
phrase
1 When labeling a track or disc, use
VOL +/– to move the cursor to the
letter which the desired phrase begins
with.
2 Press X to search.
The phrase for that letter appears in
the display. If there are two or more
phrases that start with that letter, press
X to see the next phrase.
3 Press x while the phrase you want is
shown in the display.
The cursor flashes after the phrase
you just retrieved. You can then
continue with labeling operation.
Erasing phrases
You can erase phrases from the phrase
bank while the recorder is stopped. You
can also erase phrases when the recorder
is empty.
1 Press DISPLAY for 2 seconds or
more.
2 Press the control towards . or
towards N • > repeatedly until
“BankErase” appears in the display,
and then press x.
3 Press the control towards . or
towards N • > repeatedly until
the phrase you want to erase appears,
and then press x.
“Erase!” appears in the display and
the phrase is erased.
If there is no phrase stored in the
phrase bank, “EMPTY” appears in
the display.
To cancel the operation, press
DISPLAY for 2 seconds or more.
To Next Page
Loading...
Need help?
General