Sony Walkman NWZ-E435F - Setting the Reception (Scan Sensitivity)

70
70
NWZ-E435F / E436F / E438F.GB. 4-109-569-11 (1)
Listening to FM Radio
Setting the Reception (Scan Sensitivity)
When you select stations using the “Auto Preset” function (

page 66) or the
/ button, the FM receiver may receive many unwanted broadcast stations
because sensitivity is too high. In this case, set the reception to “Low.” “High” is
set by default.
Settings
5-way button
BACK/HOME
button

Press and hold the BACK/HOME button until the Home menu
appears.

Press the /// button to select (Settings), and then press
the  button to conrm.

Press the /// button to select “FM Radio Settings,” and then
press the  button to conrm.
The list of “FM Radio Settings” options appears.

Press the /// button to select “Scan Sensitivity,” and then
press the  button to conrm.

Press the /// button to select “Low,” and then press the 
button to conrm.
To set the reception sensitivity back to the default
Select “High” in step

and press the

button to confirm.
Table of
Contents
Menu
Index