Select [Change PC settings] of the [Settings] charm.
2.
Select [Devices] of [PC settings].
3.
Select [Add a device].
4.
Select [WH-CH700N].
If passkey (*) input is required on the display of the computer, input “0000.”
The headset and computer are paired with each other and connected. You will hear a voice guidance
“BLUETOOTH connected”.
If they are not connected, see “Connecting to a paired computer (Windows 8/Windows 8.1).”
If [WH-CH700N] does not appear on the display, try again from step 3.
5.
A Passkey may be called “Passcode,” “PIN code,” or “Password.”
*
To Next Page
Loading...
