Sophos SG 210 Quick Start Guide

1
1. Before Deploying
Congratulations on your purchase of the Sophos SG appliance to protect your data
networks and computers. This Quick Start Guide describes in short steps how
to assemble the appliance and explains how to open the web-based WebAdmin
configuration tool on the security system from your administration client PC.
WebAdmin allows you to configure every aspect of the security system.
a) What does the box include
b) Device Images
*
: Front and Back
Quick Start Guide SG 210 Rev. 3, SG 230 Rev. 2
Before you begin please confirm that you have a
working Internet connection and make sure you
have the account information available that was
provided by your ISP.
* The displayed images are of SG 230 device. The SG 210 device may vary slightly.
Navigation
for LCD
1 x COM
(RJ45)
1 further expansion
bays (shown here
with optional FleXi
Port module)
2 x
USB 3.0
Multi-function
LCD display
Micro USB
6 x GbE copper – fixed. Incl. 2
bypass pairs (ports E0/1 and E2/3)
2 x SFP
ports
1 x HDMI
Connector for redundant
external power supply
Power
supply
1 x
USB 3.0
Power switch
SG 210/230
(1U rack mount chassis)
This Quick Start Guide and
Security Notes
Micro USB cable
RJ45 Ethernet cable
1 power cable
2 rack mount brackets
SG 210 Rev. 3, SG 230 Rev. 2

Sophos SG 210 Specifications

General

Storage	64 GB SSD
Antivirus Throughput	600 Mbps
Form Factor	1U Rackmount
Ports	8 x GE copper, 2 x GE SFP
Network Interfaces	8 x GE copper, 2 x GE SFP
Power Supply	Internal
Maximum Licensed Users	Unlimited