SOR 200 series User Manual

Registered Quality System to ISO 9001:2008
47/60
Form 912
sorinc.com
913-888-2630
Switch Ratings
Notes
1. Minimum ambient temperature at which the switch mechanism will operate normally. This may vary
according to actual climatic conditions. Actual minimum process temperature may be much lower.
Consult the factory for details.
2. Maximum process temperature at which the switch mechanism will operate normally. This can be increased
according to the type of process. Refer to pages 51 - 52 for more details.
3. -40°F Temperature rating with no icing.
4. Pneumatic switches must be used with clean, dry air or gas.
5. These switch designators have higher current rating for SPDT than DPDT.
6. Manufacturer specifications state maximum operating humidity must be <85% and minimum power rating
is 100mW.
Mechanical
Level Switches
Switch Designator
Resistive Amperage Inductive Amperage
Minimum
Temperature
1
Maximum
Temperature
2
A Standard Dry Contact 15 15 5 .5 .25 15 15 5 .4 .13 -15
°
F (-26°C) 250
°
F (121
°
C)
B
Hi-Temperature Dry
Contact
5 5 1.5 .5 - 5 5 1 .25 - -15
°
F (-26°C) 400
°
F (204
°
C)
C Gold Contact 1 - 1 - - 1 - .5 - - -15
°
F (-26°C) 250
°
F (121
°
C)
D Anti-Vibration 15 15 5 .5 .25 15 15 5 .4 .13 -15
°
F (-26°C) 250
°
F (121
°
C)
E High-Amp DC - - 10 10 3 - - 10 10 3 -15
°
F (-26°C) 250
°
F (121
°
C)
L
5
Mini-
Hermetically
Sealed
DPDT 5 5 5 .5 - 5 5 2.5 .25 -
-15
°
F (-26°C) 250
°
F (121
°
C)
SPDT 11 11 5 .5 .25 11 11 2.5 .25 .13
R
Anti-Vibration Gold
Contact
1 - 1 - - 1 - .5 - - -15
°
F (-26°C) 250
°
F (121
°
C)
S
Gold Contact
Mini-Hermet
1 - 1 - - 1 - .5 - - -15
°
F (-26°C) 250
°
F (121
°
C)
T
5
Anti-Vibration
Mini-Hermet
DPDT 5 5 5 .5 - 5 5 2.5 .25 - -15
°
F (-26°C) 250
°
F (121
°
C)
SPDT 11 11 5 .5 .25 11 11 2.5 .5 .13 -15
°
F (-26°C) 250
°
F (121
°
C)
V
High-Temperature
Mini-Hermet
5 5 1.5 .5 - 5 5 1 .25 - -15
°
F (-26°C) 400
°
F (204
°
C)
Y
6
Extra-High Temperature
(Ceramic)
1 1 1 .4 - 1 1 .4 - -
-40°F
Note 3
(-40°C) 800
°
F (427
°
C)
J
4
Pneumatic 316SS
Fittings
Non-bleed 3-way aluminum valve body.
Buna-N O-Rings
150 psi maximum supply, 24CFM @ 100 psi
5°F (-15°C) 200
°
F (93
°
C)
110-130VDC 210-250VDC 210-250VAC 110-130VAC 110-130VDC 210-250VDC 20-30VDC 210-250VAC 110-130VAC 20-30VDC

SOR 200 series Specifications

General

Brand	SOR
Model	200 series
Category	Switch
Language	English