TROUBLESHOOTING
Poor quality radio
reception
The aerial signal may
not be
adequate.
Try
repositioning
the
aerial w
h
ile
watching
the
signal
strength. Signal strength can
be
displayed
by
tuning
to a
DAB station. Press the
INFO.
button then turn the TUNING knob,
.
•
Volume not adjusted. Adjust the
volume.
•
Mains cable not securely connected. Connect the mains
cable
properly.
•
Batteries dead/incorrectly inserted. Insert (fresh)
batteries correctly.
•
CD contains non-audio/ Mp3 files. Turn the
TUNING
knob
repeatedly to skip to
a
CD or MP3 audio track, instead of the data
file.
•
Ensure the function selector
is
switched to the correct
work.
•
Ensure the current MODE is correctly selected.
CD display
does
not
function
properly
/ No
reaction
to
operation of
any
of
the
controls
•
Electrostatic discharge. Switch off and unplug the
unit.
Reconnect
after
a
few
seconds.
•
No CD inserted. Insert
a CD.
•
CD badly scratched or dirty. Replace or clean the CD,
see
Maintenance.
•
Laser lens steamed up. Wait until lens has
cleared.
•
CD-R
/
CD-RW
is
blank or not finalized. Use
a
finalized CD-R
/ CD-
RW or
a
suitable CD Audio disc
only.
•
Make sure the CD
is
not encoded with Copyright
protection
technologies, as some do not conform to the Compact
Disc
standard.
•
Set the
FUNCTION
selector to CD/USB
position,
then
Press MODE button switching to
CD mode.
•
CD damaged or dirty. Replace or clean
CD.
•
Program
is
active. Quit program
mode.
• A
CD badly scratched or dirty may result
in
improper
operation.
Poor
Cassette
Sound
Quality
•
Dust and dirt on the heads, etc. Clean deck parts,
see Maintenance.
•
Use of incompatible cassette types (METAL or CHROME).
•
Make sure FM aerial wire
is
fully
extended.
•
Electrical interference
in
your home can cause poor
r
ec
eption.
Move
the unit away from them (especially those with
motors
and
transformers).
To Next Page
Loading...
