What to do if my Soundstream VR-345B has no sound?
- LLindsey GonzalezAug 6, 2025
If your Soundstream Car Receiver has no sound, first, check the volume level and adjust it to a desired level. Also, verify that the wiring is properly connected.
What to do if my Soundstream VR-345B has no sound?
If your Soundstream Car Receiver has no sound, first, check the volume level and adjust it to a desired level. Also, verify that the wiring is properly connected.
Why does my Soundstream VR-345B Car Receiver skip sound?
Sound skipping on your Soundstream Car Receiver can occur if the installation angle is more than 30 degrees; adjust it to less than 30 degrees. Also, the disc might be dirty or defective. In this case, clean the compact disc or try playing a new one.
What to do if my Soundstream Car Receiver operation keys do not work?
If the operation keys on your Soundstream Car Receiver aren't working, the built-in microcomputer might not be operating properly due to noise. Try pressing the RESET button. Also, check if the front panel is properly fixed into its place; if not, reinstall it.
Why is my Soundstream Car Receiver radio not working?
If your Soundstream Car Receiver radio isn't working, ensure the antenna cable is firmly inserted. If the signals are too weak, select a station manually.
Why is my Soundstream VR-345B not turning on?
Your Soundstream Car Receiver might not be turning on because the car ignition isn't on. Ensure the power supply is properly connected to the car accessory switch and the ignition key is in the “ACC” position. Another possible reason is a blown fuse, in which case you should replace the fuse.
How to fix Soundstream VR-345B when it can't read the disc?
If your Soundstream Car Receiver can't read the disc, make sure you're inserting the compact disc with the label facing upward. Also, the compact disc might be extremely dirty or defective; clean the disc or try a new one. If the temperature inside the car is too high, cool off until the ambient temperature returns to normal.
Power Output | 50 watts x 4 channels |
---|---|
Display Type | LCD |
Bluetooth | Yes |
USB Port | Yes |
Aux Input | Yes |
AM/FM Tuner | Yes |
Preamp Outputs | Yes |
Touchscreen | No |
SD Card Input | Yes |
Steering Wheel Control Compatible | Yes |
Rear Camera Input | Yes |
Subwoofer Output | Yes |
Channels | 4 |
Peak Power per Channel | 50 watts |
Built-in Amplifier | Yes |
CD Player | No |
MP3 Playback | Yes |
WMA Playback | Yes |
Detachable Faceplate | Yes |
Screen Size | 3.4 inches |
Preamp Outputs (Channels) | 4 channels |
Dimensions (W x H x D) | 7" x 2" x 6.3" |
Identifies and describes the buttons and features on the front panel.
Instructions for resetting the unit and turning it on or off.
Configuring EQ, Bass, Treble, Balance, Fader, and Beep settings.
Accessing and navigating the main menu and setup pages.
Adjust screen ratio, backlight, clock options, and Bluetooth auto-connect.
Configure radio area, reception, and DVD language options.
Set DVD menu language, password, and parental controls.
Configure TV type, video format, and perform factory reset.
Methods for selecting stations via tuning, presets, and scanning.
Loading media and using basic playback controls.
Fast forward, rewind, A-B repeat, random, and intro playback.
OSD, zoom, PBC, language selection, and Dual Zone control.
Auto/manual tuning, channel selection, and station memory.
Pairing mobile phones and managing Bluetooth connections.
Playing music, accessing phonebook, and viewing call history.
Steps for removing the detachable panel and the main unit.
Guidelines and procedures for handling and cleaning discs.