To Next Page
L
Laura HardinJul 26, 2025
Why is there no sound output from my Soundstream Car Receiver with amplifiers attached?
- JJeffrey LiuJul 26, 2025
If there is no sound output when operating your Soundstream Car Receiver with amplifiers or a power antenna attached, the power antenna lead may be shorted to ground, requiring excessive current, or there may be an issue with the remote on the amplifiers or power antenna. Here's how to troubleshoot: 1. Turn off the unit. 2. Remove all wires attached to the power antenna lead and check each wire for a possible short to ground using an ohm meter. 3. Turn on the unit. 4. Reconnect each amplifier remote wire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external replay to provide remote-on voltage (excessive current required).
General
