+AV-IN
MODE
To start
AV-IN
Mode, tap on
AV-IN
button from main menu screen.
Connect
the external audio/video signal source to this unit.
Select AV-IN
mode in the main
menu or by pressing repeat Mode button on the front panel.
Note: If
there is no external video input, the TFT displays
"NO SIGNAL".
Press the
¢1
icon to be back to main menu.
+SETTING
CONTROL
Your device has default system settings. You can customize the settings to suit your personal
needs. Once
you change settings, your new settings will
remain until you change it again.
To start
SETTING,
tap it on main menu screen.
SOUND CONTROL
Tap
SOUND
button to show
SOUND
1 menu.
Tap
m
button to show
SOUND
2 menu.
Tap
m
button to show
SOUND
3 menu.
17
EQ
Select
EQ mode
BAS
LEVEL Bass up/down
TRE LEVEL
Treble up/down
BALANCE
Left/Right Balance Control
FADER Front/Back Fader
Control
BEEP
Set
keypad sound on /off
LOUDNESS Set
loud on /off
LOUD
LEVEL Adjust loud level
SUBWOOFER
Set
subwoofer on /off
SUBW
LEVEL
Adjust subwoofer level
SUBW
LPF
Select
a subwoofer crossover
o tion:
80HZ, 120HZ, 160HZ
To Next Page
Loading...
