Removal:
1)
Press
the button.
3)_Take faceplate
off
of
the mounting plate.
5) Detach the trim
bezel.
7) Pull
the unit out
of
the mounting sleeve.
Note:
2)
Safely detach the faceplate.
4)
Take the panel out.
6) Insert the keys into the opening between
the unit and the mounting sleeve to unlock.
8)
Illustration
of
removal.
Before
starting
installation
of
the unit, make sure the wiring is connected properly.
Use only the parts provided with the unit to ensure proper
installation.
The use
of
unauthorized parts
may
cause malfunction.
Install
the unit where it does not get in the driver's way and
will
not injure the passenger in case
there is a sudden stop, like an emergency stop.
The control panel can easily be damaged by shocks. After removing it, place it in a protective
case and be careful not to drop it
or
subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important
part. Be careful not
to
damage it by pressing on it with fingernails, pens, screwdrivers, etc.
6
To Next Page
Loading...
