Sovol SV01 - Software Setup & Configuration; Installing Cura Slicer Software; Configuring Sovol SV01 Profile

Software Installation
13
Cura.exe
Install Cura
There is a Cura installer on
the MicroSd card included
with the printer.
To download the latest
version visit the website of
Ultimaker
Open Cura and add a New
Printer
Choose Creality Cr-10 as
the base prole and change
the name to Sovol Sv01.
Adjust the size
Enter 280mm, 240mm and
300mm as the printer size
for X, Y and Z.
Congure retraction
The main difference
between Sovol Sv01 and
Cr-10 is the Direct Drive
Extruder. Retraction
distance values of ~ 3mm
and ~ 50mm/s as
retraction speed are
suitable.
1
2
3
4