Select the correct input voltage to mach your local mains (220V or 110V).
Not use the printer any way other than described here in order to avoid personal injury or property damage.
Do not place the printer near any heat source or ammable or explosive objects. We suggest placing it in a well-ventilated,
low-dust enviroment.
Do not expose the printer to violent vibration or any unstable enviroment, as this may cause poor print quality.
Before using experimental or exotic laments, we suggest using standard laments such as ABS or PLA to calibrate and test
the machine.
Do not use other power cable except the one supplied. Always use a grounded three-prong power outlet.
Do not touch the nozzle or printing surface durint operation as they may be hot. Keep hands away from machine while in
use to avoid burns or personal injury.
Do not wear gloves or loose clothing when operate the printer. Such cloths may become tangled in the printer moving parts
leading to burns. Possible bodily injury, or printer damage.
When cleaning debris from the printer hotend, always use the provided tools. Do not touch the nozzle directly when heated.
This can cause personal injury.
Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered
printing plastics or any othe material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the
print surface before every print for consistent results.
Children under 10 years of age should not use the printer without supervision.
1
2
3
4
5
6
7
8
9
10
11
Notes
To Next Page
Loading...
