Specialized EPIC - Internal Cable Routing Procedures

10
1
s
t
:
O
U
T
E
R
6
m
m
H
E
X
2
n
d
:
I
N
N
E
R
4
m
m
H
E
X
9
OUTER
INNER
 Torque the outer bolts to 160 in-lbf / 18.0 Nm, then the inner bolts to 80 in-lbf / 9.0 Nm.
Torque the outer bolts first, then torque the inner bolts. Access the inner bolts with a 4mm hex key
from the outside, through the outer bolt hole, and tighten in the standard clockwise direction.
Q
O
P
R
10
 Position the brain reservoir under the dropout and align the bracket (skid plate, O) hole with the vertical dropout hole.
 CARBON FRAME: Insert the barrel (P) into the horizontal dropout hole, then install the bolt (Q) and washer (R).
Lightly hand tighten the bolt.
 ALLOY FRAME: Install the bolt (Q) and washer (R). Lightly hand tighten the bolt.