EasyManua.ls Logo

Speck Normblock Multi 65/250 - Decommissioning; Pump;Unit Remains Assembled; Pump;Unit Is Dissembled and Stored

Speck Normblock Multi 65/250
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Commissioning/Decommissioning
28 EN 04/2019
Risk of frost:
1. Drain the pump and pipes.
2. Store the pump and pipes at risk of freezing in a dry place
with no risk of frost.
6.2 Decommissioning
For pre-requisites for shutting down the pump "Switching the
pump off" on page 27
NOTICE
For idle periods exceeding one year, elastomer components must
be renewed.
6.2.1 Pump/unit remains assembled
Switch the pump/unit on regularly – monthly to quarterly –
during long idle periods. Switch the pump back off again after
approx. 5 minutes.
This will avoid deposits forming in the pump/unit and piping
syst
em
.
NOTICE
The pump/unit can be damaged if it runs dry!
Ensure that the pump/unit is always full of water.
6.2.2 Pump/unit is dissembled and stored
Drain pump/unit. See point 8.3 on page 36
Clean and dry pump/unit.
Store pump/unit. See point 4.3 on page 19

Table of Contents

Related product manuals