Speck Normblock Multi 65/250 - 8 Maintenance; Maintenance During Operation; Maintenance Work

Maintenance
34 EN 04/2019
8 Maintenance
8.1 Maintenance during operation
 Pay attention to calm and vibration-free operation.
 Check the mechanical seal for possible leaks.
 Check the static seals for possible leaks.
 Check running noises in the bearing. Risk of wear.
 Check the function of additional connections.
 Guarantee operational readiness of reserve pumps. Operate
them once a week.
8.2 Maintenance work
NOTICE
 Before maintenance work, close all shut-off valves and drain
all pipes.
When? What?
Regularly  Clean strainer basket.
 Check screw connections.
 Check components for
deformations.
If there is a chance of
frost
 Drain pump and pipes sensitive
to frost in good time.
 After completing all maintenance work, perform all necessary
meas
ures for start-up. See point 6.1 on page 26