Spectra Precision EPOCH 35 User Manual

EPOCH 35 GNSS System User Guide 19
Setup, Connection, and Cabling 2
20.1 Configuring the internal rover radio
To configure the internal radio in the EPOCH 35 GNSS receiver, use the receiver
control panel.
By default, the internal radio has only a few “test” frequencies installed at the factory.
To configure the frequencies of the base or rover, contact your Spectra Precision
distributor. For more information, see the documentation supplied with your base
radio.

Spectra Precision EPOCH 35 Specifications

General

Brand	Spectra Precision
Model	EPOCH 35
Category	Receiver
Language	English