Spectra Precision EPOCH 35 User Manual

5 Default Settings
36 EPOCH 35 GNSS System User Guide
5.1 Default settings
These settings are defined by default.
5.2 Default behavior
When you start the GNSS receiver, the logging settings are the factory defaults and
logging does not begin automatically. This is true in all of the following situations:
• it is the first time that the receiver has been used
• the receiver has been reset to its factory defaults
Function Factory default
General Controls: Elevation mask 10°
Serial Port 1: Baud rate 9,600
Format 8-None-1
Flow control None
Serial Port 2: Baud rate 9,600
Format 8-None-1
Flow control None
Antenna: Type Internal
Antenna height Dependent on measurement method
Group All
Measurement method Set by software

Spectra Precision EPOCH 35 Specifications

General

Brand	Spectra Precision
Model	EPOCH 35
Category	Receiver
Language	English