FOCUS 35 TOTAL STATION USER GUIDE
3 – Getting Started
28
Trigger Key
The trigger key functions as an On/Off key (z). A LED in the trigger key indicates if the instrument
is turned on. A solid light indicates On and a flashing light indicates Suspend Mode and waiting for
connection, see also Power Management, page 95.
When a field application is running, the trigger key performs the same function as the
Measurement1 key (M) on the Face1 side and the Enter key (P) at the Face2 side.
Control Unit Face1 (if fitted)
Data entry on the keyboard is similar to that of a mobile phone. The “A” button scrolls between
three different states of data entry: 123, ABC, and abc. Multiple presses on one key scrolls through
the letters on that key depending on which mode is currently selected.
The image shows the Control Unit Face1.
Keys Description
M
z P
Measurement1 - definable
L Measurement2 - reflectorless measurement and recording
(Except the measurements in QuickShot menu without open job)
Item Description
❶ Quick Shot Menu
❷ Measurement 1
❸ Measurement 2
To Next Page
Loading...
