Spectra Precision FOCUS 35 - Robotic Measurement

FOCUS 35 TOTAL STATION USER GUIDE
5 – Instrument Operation Methods
82
The Spectra Precision GeoLock technique combines a GNSS position with the FOCUS 35 robotic total
station and the robotic roving operator. The remote instrument can then be directed towards the
robotic roving operator using the GNSS position and a subsequent search is quickly performed to
reacquire the target at the robotic rover.
Robotic Measurement
Combining the StepDrive motor capability with the image based tracking system and the radio
capability enables the instrument to carry out measurements robotically. This enables a single
operator to control the instrument and carry out measurements or set/stakeout from the rod at the
point.