FOCUS 35 TOTAL STATION USER GUIDE
3 – Getting Started
36
Disconnecting ActiveSync
C
CAUTION – To avoid disconnection problems, close ActiveSync before removing the cable.
Next remove the cable from the computer and then the cable from the instrument.
To disconnect ActiveSync:
1. Double-tap the connection icon in the task bar at the bottom of the screen, see image below for
location of icon.
B
Tip – You have to wait a few seconds until the next screen appears.
2. Tap Disconnect and then remove the cable:
For more information about ActiveSync, refer to the help or visit the Microsoft website.
Laser Information
For more information, see Laser Safety, page 3.
To Next Page
Loading...
