Spectra PowerBox 100-IoT-J19 - SATA Configuration

Spectra GmbH & Co. KG
vertrieb@spectra.de
User Manual
Spectra PowerBox 100-IoT
Version 1.1
November 2017
51
4.3.7 SATA Configuration
This allows you to configure mode of operation and to enable or disable for the
SATA interfaces. Use of default setting is recommended in the section.
■ SATA Mode
This allows to set AHCI mode (default) or IDE mode.
■ Serial-ATA Port 0
Default is Enabled.
■ Serial-ATA Port 1
Default is Enabled.
Chapter 4: BIOS Setup