Spectra GmbH & Co. KG
vertrieb@spectra.de
User Manual
Spectra PowerBox 100-IoT
Version 1.1
November 2017
6.3.2 Wireless Network / WLAN
As shown above, left-click the network symbol at the bottom right corner and select
“Preferences”.
Now click on the “Wireless Networks” item in the left column. Two buttons appear in the right
window section (“Enable” and “Scan”). Click on “Enable” to enable the “Scan” button. After
having clicked on the “Scan” button, the environment is browsed for available wireless
networks.
Now left-click on the desired wireless network in the left column and press the “Connect”
button. Here you can also define whether the IP address is to be assigned statically or
configured by the DHCP server.
85
To Next Page
Loading...