Spectra PowerBox 100-IoT-J19 - 4.5 Security

Spectra GmbH & Co. KG
vertrieb@spectra.de
User Manual
Spectra PowerBox 100-IoT
Version 1.1
November 2017
62
4.5 Security
This section allows you to configure and improve your system and allows you to
set up some system features according to your preference.
4.5.1 Administrator Password
Administrator Password controls access to the BIOS Setup utility.
4.5.2 User Password
User Password controls access to the system at boot and to the BIOS Setup utility.
■ High Precision Timer
Enable (default) or disable High Precision Event Timer (HPET) in the operating
system.
■ Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Power Off: Leave the computer in the power off state. This is the default setting.
Power On: Leave the computer in the power on state.
Last State: Restore the system to the previous status before power failure or
interrupt occurred.
■ Mini PCIe/mSATA Select
This allows to set shared Mini PCIe slot for use as either Mini PCIe (default) or
mSATA interface.
■ Wake on LAN Enable
This enables or disables Wake on LAN feature. Default is Enabled.
Chapter 4: BIOS Setup