Spectra GmbH & Co. KG
vertrieb@spectra.de
User Manual
Spectra PowerBox 100-IoT
Version 1.1
November 2017
To update the update catalogue, you must at first run the command apt-get update. After the
completion of this update, the updates can be started with the command apt-get upgrade.
Any updates which are available will be shown. You have now the choice to press the “Y” key
to install the proposed packages. If you only want to install individual proposed packages, the
installation can be run with the command apt-get install <Paketname>. Any
dependencies which might be affected by the update are automatically dissolved.
If individual services do not work as expected after the update, you should reboot the Spectra
PowerBox 100-IoT. As described above, the operating status of the relevant services can be
viewed via the start page of the Web interface.
91
To Next Page
Loading...