Spectral BRA2 - Technical Specifications

62
Technical Specications
Power supply
- Operating voltage 100–240 V
- Operating frequency 50/60 Hz
- Power consumption ECO Standby = 0,40 W (factory setting)
- Power consumption AUT Standby ca. 3,5 W
- Power consumption CEC Standby ca. 1,2 W…3,6 W
(dependeing on the amount of connected devices)
- Power consumption in idle mode (no output signal) ca. 10,2 W
- Power consumption maximal ca. 150 W
In- / Outputlevel analogue
- AUX = max. 2,0 V (eective)
- SUB out= max. 20V (eective)
Decoder/Virtualizer
- DTS Digital Surround
- Dolby Digital
- PCM (32 kHz…96 kHz/8 Bit…24 Bit)
- DTS TruSurround
Operating temperature range
5ºC (41ºF)...35ºC (95ºF)
Bluetooth®
- Bluetooth® Standard 4.0 (A2DP)
- Supports CSR aptX® decoding
- Range up to 10m
- Frequency range 2400 – 2483.5MHz (2.4 GHz ISM Band)
- Max. emitted radiated power 10 mW (+10 dBm)
HDMI®
- HDMI® (with Audio Return Channel, 3D, 4K)
- Supported video formats:
640 x 480 px 60Hz up to 3840 x 2160 px 30 Hz
- Suported CEC functions:
Volume (Volume +/–, Mute)
System Standby
One-Touch-Play
Setting ranges
- Volume: 0 = Mute, 1–99 = –98 dB…0 dB (step width = 1 dB)
- Bass / Treble : –6 dB…+6 dB (step width = 1 dB)
- LipSync (audio signal delay): 0 ms…110 ms (step size = 10 ms)