Once you have selected the source with the function to be programmed and conrmed your selection
using <ok> you will see the message “press remote button”.
Position the original remote control (e.g. from your DVD player) opposite the one from your sound system
(approx. 5 cm distance). On the original remote control briey press the key with the function to be pro-
grammed and wait until the process has been conrmed on the display.
The functional keys soft x1 - soft x8 and soft y1 - soft y8 can be assigned with arbitrary functions of the
respective device. In the menu suggestions are programmed, conrm with <ok> to accept. If you want to
assign another function, the name can be overwritten by using the keys 0 - 9. A maximum of ve marks
can be assigned.
If the programming has been successful you will see the message “Programming successful”.
Repeat the process until all desired functions have been transferred. Press <m> to return to the
previous menu.
If the transfer of the remote control data is unsuccessful the message “Programming failed” will
appear for approx. 5 seconds. After that the previous menu will be displayed and you can either repeat
the programming or abort the process.
To Next Page
Loading...
