Spectralink 7520 and 7540 User Guide
14158600 Version 10.0
March, 2014 59
5 Press Options.
6 Scroll to
Delete and press Select.
7 Press Yes to remove the headset from the device list.
Auto Connect
It is possible to connect automatically to the handset when the headset is turned on.
1 Press Menu
to enter main menu.
2 Scroll to
Settings and press Select.
3 Scroll to Bluetooth and press Select.
4 Scroll to Active and press Select.
5 Scroll to
Settings and press Select.
6 Activate Auto connect
by pressing Select, then press Back. The wireless headset will now
connect automatically to the handset when the headset is turned on.
Wireless Headset Volume
When the handset is on hook, it is possible to adjust the start speaking
volume of the wireless headset.
1 Press Menu
to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Bluetooth and press Select.
4 Scroll to Active and press Select.
5 Scroll to Settings and press Select.
6 Scroll to Headset volume and press Select.
7 Press left or right side of navigation key to adjust the volume.
Switch Between Wireless Headset and Handset
When the headset is active and the handset is off hook, the audio can be switched between the
headset and the handset
1 Activate handset / headset soft key by pressing the left or the right side of the navigation
key.
2 Press Handset, and the audio is switched to the handset.
3 Press Headset, and the audio is switched back to the headset.
Last Number Redial
Consult the user guide of the wireless headset for last number redial instructions.
To Next Page
Loading...
