Spektrum DX8G2 User Manual

37
SPEKTRUM DX8G2 • TRANSMITTER INSTRUCTION MANUAL
EN
Use System Setup to enter the System List from the Function list
without turning the transmitter off. A Caution screen will appear
that warns that RF will be disabled (the transmitter will no longer
transmit). Press YES if you are sure and want to access the System
List. If you are not sure, press NOtoexittothemainscreenand
continue operation.
If you do not press YES or NO,thesystemwillexittothemain
screenandcontinueoperationwithinapproximately10seconds.
WARNING: Do not press YES unless the model is turned
off or the model is secured.
The Monitor screen displays the servo positions for each channel
graphically and numerically. This is useful to verify programming
functions,trimsettings,mixdirections,etc.Thenumericvalueis
directlyrelativetothetraveladjustandmixvalues(e.g.,100%
travel adjust equals 100% value in the Monitor).
FUNCTION LIST
System Setup
Monitor

Spektrum DX8G2 Specifications

General

Modulation	DSMX
Proper use	Airplane, Aircraft
Product type	Remote control
Rubber grips	Yes
Product color	Black
Frequency band	2.4 GHz
Channels quantity	8 channels
Brand compatibility	Any brand
Display type	LCD
Battery capacity	2000 mAh