11-1
Entering Patient Information
16.1 Setting Patient Information
Certain patient information directly affects ECG analysis, correct and
complete patient information is helpful to the accuracy of analysis and
treatment of the patient. Patient information is classified as required
information and detailed information. The required information must be
entered. In the [Patient Info] screen, an asterisk (*) is placed behind the
required information. The detailed information helps you to know more
about the patient.
To set patient information, follow the steps below:
1. In the main screen, click [ ] → [Setup] to enter the setting screen.
2. Click [Patient Info] to enter the patient information setting screen.
3. Select the required information items, ID mode, etc.
4. For specific setting information, see 8.2 Patient Info Setup.
16.2 Entering Patient Information
Use any of the following methods to enter patient information before
taking an ECG examination.
Enter patient information manually
Read patient ID with the device’s camera
Read patient ID with a barcode reader
To Next Page
Loading...