11-7
19.5.3 WLAN Setup
Enter the WLAN setting screen and turn on/off the WLAN switch to enable
or disable the WLAN.
After WLAN is enabled, the device starts to search for available wireless
networks in the area. Select the one you would like to connect. If the
wireless network is secured, there will pop up a window requiring
password. Enter the correct password, then click [Connect]. In a short
while, a wireless connection is set up.
19.5.4 Server Setup
Menu Items Description
AI Server
Options: Platform, CardIoT
Set the AI server that needs to connect.
IP Address
Enter the IP address and port of the AI server. Then click the
[Test] button to test the connection to AI server.
Port
Local IP Enter your local IP.
19.6 System Setup
19.6.1 Display & Sound
Menu Items Description
Brightness Drag the slider to adjust the brightness of the display screen
Volume Drag the slider to adjust the volume of the device.
Touch Tone On, Off
QRS Beep On, Off
Low Battery
Beep
On, Off
Lead Off Beep On, Off
Print End Beep On, Off
To Next Page
Loading...