11-4
17.6 Copying Reports
The device can print another copy of the latest ECG report.
Operation procedure: In the main screen, click [ ] → [Copy] button:
When the archived data is not empty, the most recently stored report
will be printed directly.
When there is no report, a “No data!” message appears. Acquire ECG
data first.
17.7 Freezing Waveforms
You can freeze the currently displayed waveforms on the screen for a
careful observation or printing. If the ECG data is less than 10 seconds
before freezing, it is necessary to wait for the device to collect enough
data for 10 seconds before freezing.
Operation procedures:
1. In the main screen, click [Freeze] button to enter the waveform
freezing screen.
2. Click the [Print] button to print the report.
17.8 Report Examples
17.8.1 Auto mode
Take a 6x2+1R real-time sampling ECG report under the 12-lead auto
measurement mode as an example to illustrate the elements in the
report.
A report usually includes waveform area, patient information area,
measurement parameter area, diagnosis result area. You can also select to
print the average template and measurement matrix information.
To Next Page
Loading...