EasyManua.ls Logo

Spinfire Pro 2 - AC Adaptor Usage and Compatibility

Spinfire Pro 2
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
the battery bar indicator shows 4 bars, then your machine is charged and
ready to play. You can ignore the light on the charger.
Please note, fast chargers reduce the lives of batteries slightly, so it is
always recommended to use the standard charger unless you have time
constraints.
Your charger should only be used in a dry environment. As the charger
itself can get hot during charging, we recommend you position the
machine and transformer away from combustible items. This charger is
only suitable for sealed lead acid batteries.
Please note, this charger cannot be used to provide direct power to
the machine. If you wish to run directly o AC, you need to purchase a
separate AC Adaptor.
AC ADAPTOR
The AC Adaptor is an optional accessory, but it can be used as your
primary power source (you can order a machine without any internal or
external battery). Simply plug the AC Adaptor into your machine and turn
the master switch to External Battery/AC.
Note, if you do have an internal battery, the AC Adaptor can still be used.
It will not damage the internal battery.
Your AC Adaptor should only be used in a dry environment. The Spinre
AC Adaptor has been tested to work perfectly with our machine and
we do not recommend substituting it with a compatible model. Please
disconnect it from the machine when not in use. If using an extension
cord, please ensure it is a good quality, thick cord, at least 16 gauge.