EasyManua.ls Logo

Spinfire Pro 2 - Hopper Attachment Methods; Packaging & Battery and Charging; Retaining Original Packaging; Battery Life and Initial Charge

Spinfire Pro 2
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Packaging
We recommend you keep your box in case you need to ship your ma-
chine back to the supplier at a future point in time.
BATTERY AND CHARGING
Your machine should last between 3-8 hours, depending on the settings
you are using (this assumes you are using the standard 20Ah size).
The machine should arrive to you with some charge in the battery,
however, if you have time, we encourage you to charge the machine
before its rst use.
Internal Battery
If you have an internal battery, simply plug the charger into the charger
jack on the rear of the machine and plug the other end into a wall socket.
Any master switch position will work.
Your battery should be charged at least once per month, even if it has not
been used. This will maintain the life of the battery.
charger, they may also be in the box.
You can attach the hopper either upright for play mode, or upside down
for portability/storage. To attach the hopper, simply align it correctly and
then push down on it until it locks into place.
Hopper upside down for
portability/storage