18
REMOTE CONTROL
The remote control has been designed to be as small as possible to t
easily into your pocket. There is also a slot/pocket located on the back
of the machine under the control panel for storing your remote. When
transporting your machine, be careful not to tilt your machine all the way
back into an upright position as the remote may fall out of the pocket.
By default, your remote control will control your machine and any other
Spinre ball machine in its proximity. If this is an issue, you can pair your
remote to only control your machine and no other. For instructions on
how to do this, please visit https://www.spinresport.com/kb/using-a-
pairing-remote-control/.
FEED
SLEEP
Feed on/o
Sleep mode on/o to conserve battery while
collecting balls. You will hear a 1 second beep when
the machine enters sleep mode, a fast double beep
when exiting and a beep every 30 seconds while it’s
sleeping. You may also press the feed button to exit
sleep mode. You can replace the sleep function with
the Single Ball Fire (SBF) function if you prefer (see
below for more details).
----------------------------------------------------------------------------------------
To Next Page
Loading...