22
Padel Software
Padel software (used in Spain and countries where Padel Tennis is
played) can now be activated by simply pressing POWER + DOWN +
RIGHT when turning on the machine. Once activated, a 2nd and 3rd
option in the VERTICAL menu is added. The 2nd option is a Vertical
Oscillation motion, ranging from 90 to 200. The 3rd option is a drill
giving one forehand, one backhand and then a smash/bandeja (the drill
continuously repeats).
Ball Counter
The machine has a counter (similar to a car’s odometer) which can tell
you how many balls have been red. This can help you understand the
amount of usage your machine has had. To view the count gure, simply
turn on the machine by pressing the POWER button and FEED button
at the same time for 3 seconds. This data can be lost when upgrading/
downgrading software or replacing a motherboard.
Sealed Lead Acid (SLA) Battery or Lithium Battery
Our machines are congured by default to work with an SLA battery. If
you change to a lithium battery, you will need to congure this so that
your 4 bar battery indicator on the LCD will accurately show you how
much usage you have left. To do this, turn your machine on by holding
the POWER and HORIZONTAL buttons at the same time for 3 seconds.
We recommend you choose “Lithium2” and press MENU to save the
selection.
We also recommend you use a lithium battery charger.
performing step 2 above correctly. If you do not set the machine to the
correct position before turning on the machine, you will nd that the
calibration may be o target. You will either need to turn the machine
o to try again, or physically point your machine in a direction that will
achieve the desired results.
To Next Page
Loading...